spare wheel carrier removal....

handsomejackuk

Zorg Guru (III)
Australian Zeds
The M44 Massive
Joined
Aug 8, 2016
Points
145
Location
t
anyone removed the spare wheel carrier ? i can see how it comes off,, i want to get it powder coated, but the metal cord that drops from the boot seems to be permanently attached... i have removed the rear hinge bolts and the two lowering bolts any advice... i dont want to cut the wire...?
 

Sean d

Zorg Expert (I)
Supporter
British Zeds
Joined
Sep 29, 2015
Points
201
Location
Lincolnshire
Model of Z
Z3 2.8
I'm also taking mine off but it won't be going back on, I've not looked yet but @Bozzy has taken his off I believe
 

colb

Zorg Guru (V)
British Zeds
Joined
Nov 25, 2012
Points
178
Location
Newport, South Wales,UK
Model of Z
Z3 M43 1.8 (1999) and Z4 E85 2.5 (2003)
Found this on an old post from 2011

The lowering cable has a threaded nipple on the end that screws into the end of the cradle bolt.

Remove spare wheel in the usual manner and then raise the now much lighter cradle and unscrew the cable from the end of the cradle bolt
 

Bozzy

Zorg Guru (V)
Supporter
British Zeds
Joined
May 21, 2015
Points
191
Location
Long Eaton.
Model of Z
3 2.8
anyone removed the spare wheel carrier ? i can see how it comes off,, i want to get it powder coated, but the metal cord that drops from the boot seems to be permanently attached... i have removed the rear hinge bolts and the two lowering bolts any advice... i dont want to cut the wire...?
As @Sean d said I removed mine.
@handsomejackuk what I did to remove the wire rope was cut a slot in the black plastic handle with a junior hacksaw i couldn't see another way apart from cutting the wire which I didn't want to do so it could be refitted if needed.

Steve
 

GazHyde

Administrator
Administrator
Global Moderator
M Power
Joined
Dec 2, 2011
Points
226
Location
Berkshire
Model of Z
Z4 MR
Don't cut it off! There is a thread which screws in to the cage, just need to grip the hex section firmly (mole grips work well) and unscrew. Maybe a squirt of wd40 before hand if you fancy!
 

handsomejackuk

Zorg Guru (III)
Australian Zeds
The M44 Massive
Joined
Aug 8, 2016
Points
145
Location
t
thanks, i have been told that it will unscrew from the carrier section...i will have a look later and take some pictures... thanks Col...will keep you all posted
 

handsomejackuk

Zorg Guru (III)
Australian Zeds
The M44 Massive
Joined
Aug 8, 2016
Points
145
Location
t
Don't cut it off! There is a thread which screws in to the cage, just need to grip the hex section firmly (mole grips work well) and unscrew. Maybe a squirt of wd40 before hand if you fancy!

thanks Gaz... you answered me on facecook too.... wey hey
 

handsomejackuk

Zorg Guru (III)
Australian Zeds
The M44 Massive
Joined
Aug 8, 2016
Points
145
Location
t
job done mole grips on the cable part on the carrier and its free awaiting a repaint or my spares pile....
 
Top