Recent content by Kenhayes247

They are available in Germany @ tenax24.de but they are overpriced and the shipping is ridiculous given the UK is now non EU. I am sure somebody on here recently had the same question and sourced them in the UK. The screws should be readily available in the UK however you would need to section...

This will give you more information and will confirm the style http://www.bmwstylewheels.com/

Are all 4 wheels the same, refer to what i mentioned earlier about the information around the bolt holes. From what I can see the wheel is: 7 1/2 x 17 Inch. IS also known as ET is 41. The smaller the number the further they poke outwards towards the wheel arch. Check to see if 2 of your wheels...

All the information you require regarding wheel size, dimensions etc is situated around the bolt holes. The wheel is style 18 I think, either way not an M wheels

The attachment appears to be blank apart from someone’s email address. Z3M wheels are 17 inch by the way not 19. They may be M wheels but not from a Z3.

https://zroadster.org/members/althulas.1667/

Sometimes using the autodoc app on a phone to buy parts is cheaper than using a PC and vice versa, bit bizarre I know but I switch between the two.

I moved my seat heating and ASC switches there and replaced (after minor modification) the holes left with VDO oil pressure and Voltmeter gauges.

Here is a cheaper alternative, the number plate must be worth a few quid. Gerade bei #Kleinanzeigen gefunden. Wie findest du das...

I will certainly be interested in what you think of these. Is there UK import duty to pay do you know?

Unfortunately not.

Fingers crossed indeed, check the new bulb for continuity before fitting or onnect it to a power source to make sure all is okay, good luck.

If the light is not on, irrespective of the key position, I would check again the bulb you put in but preferably use a voltmeter to check the connections. Key in ignition and turned to position 2 so there is voltage present

Just to be clear, with the key in the ignition and turned to position 2 the MIL is on. When you start the car, the MIL remains on even though there are no faults or it goes off?

Thank you for the link. I have already looked at these and it's certainly a consideration. That said, a good but used set for less would be preferable.