BillyB's latest activity
-
Defo OEM for this. -
Always best to go for oem brands for sensors in particular maf sensors although I have had success using Hass Brand cam shaft sensors...
-
Ahh, I realised that the other tank strap comes in two parts, but failed to see that this one comes in two parts as well. Silly me...
-
BillyB replied to the thread Fuel Tank Strap Removal Struggle.Presumably you are replacing them with new 2 part straps, so just cut them off
-
Checked mine today out of curiosity, it appears I have the same problem. Ran engine but flap stays open. Vacuum is there, flap works...
-
BillyB replied to the thread Exhaust Valve Vacuum Information.Hi Stephen, that's the assumption I have that the power is not getting to the solenoid to make it open therefore shutting the flap...
-
Just found this on Pistonheads. That is called the Active Exhaust System Actuator (AESA). The AESA consists of the following: Exhaust...
-
No worries, happy to help.
-
BillyB replied to the thread Exhaust Valve Vacuum Information.Ah, that would explain it possibly, it's definitely about the 2500 area. Ok going to get the solenoid and the feed checked sometime...
-
BillyB replied to the thread Exhaust Valve Vacuum Information.Thanks for info, what I am getting is , flap open engine off , flap still open engine running , good vacuum to solenoid but solenoid...
-
BillyB replied to the thread Exhaust Valve Vacuum Information.@Eddie Zedder I am following this thread with interest. I have chatted with @Stevo7682 often on the workings of this exhaust flap. So...
-
The Highland Classic Motor Club organised a 'Drive it Day 2025' run in support of the NSPCC through the Federation of British Historic...
-
A saying with the words 'touch' and 'bargepole' springs to mind!
-
Was going to say facelift doesn’t have a gasket 😀
-
It's in the rear light section on Realoem. As Steve said the facelift has grommets/washers.
